CCPortal
DOI10.1021/acs.iecr.8b03671
Syngas Production via Methane Dry Reforming over Ceria-Magnesia Mixed Oxide-Supported Nickel Catalysts
Al-Swai, Basem M.1; Osman, Noridah1; Alnarabiji, Mohamad Sahban1; Adesina, Adesoji A.2; Abdullah, Bawadi1,3
发表日期2019
ISSN0888-5885
卷号58期号:2页码:539-552
英文摘要

Dry reforming of methane (DRM) is becoming an appealing research topic because of the urgent need to minimize global warming and the demand for alternative energy resources. However, DRM commercialization and industrial scale application are limited by the deactivation of the applied catalysts. In this work, Ni-based catalysts supported on CeO2-MgO mixed oxides (0-20% CeO2 molar content) were prepared and employed in DRM. The support was synthesized via a coprecipitation method followed by impregnation of Ni metal. The catalysts prepared were characterized by X-ray diffraction, Brunauer-Emmett-Teller (BET) analysis, temperature-programmed reduction, X-ray photoelectron spectroscopy, and field emission scanning electron microscopy (FESEM) techniques. The catalytic performance of the catalysts was evaluated in a fixed-bed continuous reactor with an equimolar (CH4/CO2) ratio at 1073 K. The addition of CeO2, as a promoter to the support, altered the interaction between Ni and MgO and modulated the properties of the catalysts toward an excellent activity performance and multiwalled carbon nanotubes (MWCNTs) production. CeO2 significantly enhanced the BET surface area, promoted Ni dispersion, and improved the reducibility of the catalyst. Among the obtained catalysts, Ni/15%CeO2-MgO achieved the maximum conversion of both CO2 (95.2%) and CH4 (93.7%) without significant deactivation during the reaction. The superior catalytic performance of the aforementioned catalyst is due to the presence of a high quantity of active Ni sites and the high Ce3+/Ce4+ ratio that promoted the formation of oxygen vacancies. With the aid of temperature-programmed oxidation, FESEM, transmission electron microscopy, and Raman spectroscopy analysis, it was found that the amorphous carbon encapsulated the active sites of the catalysts, in the absence of Ce, which suppressed the syngas production significantly. The introduction of Ce not only decreased the deposited carbon but also changed the type of the later to MWCNTs, which had positive effects on the activity of the catalyst.


WOS研究方向Engineering
来源期刊INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
文献类型期刊论文
条目标识符http://gcip.llas.ac.cn/handle/2XKMVOVA/92133
作者单位1.Univ Teknol PETRONAS, Chem Engn Dept, Bandar Seri Iskandar 32610, Perak, Malaysia;
2.ATODATECH LLC, Pasadena, CA 91101 USA;
3.Univ Teknol PETRONAS, Inst Contaminant Management Oil & Gas, CO2 Utilizat Grp, Bandar Seri Iskandar 32610, Perak, Malaysia
推荐引用方式
GB/T 7714
Al-Swai, Basem M.,Osman, Noridah,Alnarabiji, Mohamad Sahban,et al. Syngas Production via Methane Dry Reforming over Ceria-Magnesia Mixed Oxide-Supported Nickel Catalysts[J],2019,58(2):539-552.
APA Al-Swai, Basem M.,Osman, Noridah,Alnarabiji, Mohamad Sahban,Adesina, Adesoji A.,&Abdullah, Bawadi.(2019).Syngas Production via Methane Dry Reforming over Ceria-Magnesia Mixed Oxide-Supported Nickel Catalysts.INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH,58(2),539-552.
MLA Al-Swai, Basem M.,et al."Syngas Production via Methane Dry Reforming over Ceria-Magnesia Mixed Oxide-Supported Nickel Catalysts".INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH 58.2(2019):539-552.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Al-Swai, Basem M.]的文章
[Osman, Noridah]的文章
[Alnarabiji, Mohamad Sahban]的文章
百度学术
百度学术中相似的文章
[Al-Swai, Basem M.]的文章
[Osman, Noridah]的文章
[Alnarabiji, Mohamad Sahban]的文章
必应学术
必应学术中相似的文章
[Al-Swai, Basem M.]的文章
[Osman, Noridah]的文章
[Alnarabiji, Mohamad Sahban]的文章
相关权益政策
暂无数据
收藏/分享

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。